|
|
Economy Frame Mount Vertical
Economy FRAME MOUNT VERTICAL
GPD: 1,500 - 10,800
STANDARD ELECTRICAL CONTROLS :
- Fused electrical control junction box
- Off/On safety switch
- Low flow, no feed water pressure switch
- Adjustable dual level float switch
- Fused motor circuit
|
 |
STANDARD FEATURES
- Powder-coated steel frame
- Stainless steel multi-stage pump
- Thin film composite membrane
- PVC membrane housing
- High-pressure nylon tubing
- Liquid-filled high pressure gauge
- Feed water inlet solenoid valve
- Adjstbl. waste needle valve
- 20” 5 micron BB pre-filter
- High-press. brass comp. fittings
- Salt rejection 95 - 99%
|
OPTIONS:
- Product and waste flow meters
- Recycle valve (requires waste flow meter)
- Pre-filter IN & OUT gauges
- Stainless steel membrane housings
- Manual flush
- Tank pressure switch
- 50 hz electrical requirement
- Shipping crate
|
FEED WATER PARAMETERS:
*Temperature 85o F maximum *Pressure 40 - 80 psi maximum *TDS 2000 ppm maximum. If higher, consult factory *Iron tolerance 0.5 ppm maximum *Hydrogen sulfide must be removed *Silica tolerance can not be higher than 125 ppm in the concentrate stream. Antiscalant should be considered for any levels over 75 ppm. *Turbidity should be removed SHardness must be removed.
OPERATING PARAMETERS:
*Operating pressure 200 psi maximum *Water recovery up to 60% and is field adjusted by customer. It is not recommended that the recovery be set higher than 50%. Only under certain conditions can the recovery be set higher. *pH range 3 - 11 *Flow rates are determined by the membrane mfgr’s. testing criteriea of 1500 ppm Nacl solution, 77oF water temperature, 225 psi at 10-15% recovery. Actual flow rates may vary depending on the pre-treatment used, water conditions, system size, membrane array and applied pressure. |
|
MODEL |
GPD
(minimum) |
MEMBRANE |
MOTOR |
PIPING
inlet waste prod |
DIMENSIONS |
Order |
Price |
ECFMV-1 |
1,500 - 2,000 |
4” x 40” 1ea. |
1 HP |
3/4” 1/2” 1/2” |
17” x 16” x 49”H |
|
$2675.00 |
ECFMV-2 |
9,000 – 10,800 |
4” x 40” 2ea. |
2 HP |
1” 1/2” 1/2” |
17” x 16” x 52”H |
|
$3275.00 |
ECFMV-3 |
7,500 – 9,000 |
4” x 40” 3ea. |
2 HP |
1” 1/2” 1/2” |
17” x 16” x 52”H |
|
$3975.00 |
ECFMV-4 |
6,000 – 7,200 |
4” x 40” 4ea. |
3 HP |
1” 1/2” 1/2” |
17” x 16” x 52”H |
|
$4550.00 |
ECFMV-5 |
7,500 – 9,000 |
4” x 40” 5ea. |
3 HP |
1” 1/2” 1/2” |
17” x 16” x 52”H |
|
$4975.00 |
ECFMV-6 |
9,000 – 10,800 |
4” x 40” 6ea. |
3 HP |
1” 1/2” 1/2” |
17” x 16” x 52”H |
|
$5675.00 |
|
|
